High-efficiency scrubber
High-efficiency scrubber
High-efficiency scrubber
High-efficiency scrubber
High-efficiency scrubber
+
  • High-efficiency scrubber
  • High-efficiency scrubber
  • High-efficiency scrubber
  • High-efficiency scrubber
  • High-efficiency scrubber
High-efficiency scrubber
Our company’s high-efficiency scrubber is a cutting-edge, environmentally friendly, energy-saving device that integrates a centrifugal separator with a wet scrubber. It boasts low energy consumption—both in terms of pump power and water usage—compact dimensions, high purification efficiency, and resistance to clogging. The equipment is primarily used to remove particulate matter and water-soluble pollutants (such as formaldehyde and acidic gases) from exhaust gases, and it finds widespread application in areas like dust removal from drying exhaust in the man-made board industry and in the pre- and post-treatment of process exhaust gases in the chemical industry.

Key words:

High-efficiency scrubber

Classification:

Contact Our Experts:

Product Details


  Our company’s high-efficiency scrubber is a cutting-edge, environmentally friendly, energy-saving device that integrates a centrifugal separator with a wet scrubber. It boasts low energy consumption—both in terms of pump power and water usage—compact dimensions, high purification efficiency, and resistance to clogging. The equipment is primarily used to remove particulate matter and water-soluble harmful substances (such as formaldehyde and acidic gases) from exhaust gases, and it finds widespread application in areas like dust removal from drying exhaust in the man-made board industry and in the pre- and post‑treatment of process exhaust gases in the chemical industry.

  An efficient scrubber is a wet‑type air‑pollution control device that achieves thorough contact between the scrubbing liquid and exhaust gases, thereby removing particulate matter, soluble pollutants, and certain acidic or alkaline components from the gas stream. Upon entering the unit, the exhaust gas is thoroughly mixed with the scrubbing liquid under the action of a cyclonic flow, spray nozzles, or a Venturi configuration; pollutants are captured by liquid droplets or absorbed into the liquid phase. The cleaned gas is then discharged after undergoing gas–liquid separation.

The equipment can be configured with a circulating liquid system, spray nozzles, mist eliminators, a dosing system, and a wastewater discharge system, depending on the composition and concentration of the exhaust gases as well as the emission requirements.

Product Features

Adequate gas–liquid contact
The cyclonic flow and Venturi structure enhance gas–liquid mixing, thereby improving pollutant capture and absorption efficiency.

The equipment occupies a small footprint.
The compact design reduces the space required for conventional scrubbers and external ductwork.

Not easy to clog
The flow channels and spray structures can be designed according to the characteristics of dust and pollutants, thereby reducing the risk of localized blockage.

The liquid-to-gas ratio is adjustable.
The circulating liquid flow rate can be adjusted according to the air handling capacity, pollutant concentration, and purification requirements.

Corrosion-resistant design
The equipment may be constructed from stainless steel, plastic, or other corrosion-resistant materials, and a cleaning solution should be formulated according to the process medium.

Applicable Industries

It is suitable for industries such as chemical processing, metallurgy, acid pickling, electroplating, spray coating, waste treatment, laboratory ventilation, and industrial exhaust gas treatment, and can handle dust-laden exhaust gases, acidic exhaust gases, alkaline exhaust gases, and water-soluble pollutants.

 

 

1

Get free product quotes

Our staff will contact you within 24 hours (working days), if you need other services, please call our service hotline