The device is a special equipment for cooling solid materials by water cooling, and its main function is to cool and transport hot solid materials. The cooler is mainly composed of feed port, cooling box and unloading hopper. The feed port of the cooler is connected with the material conveying pipe, and the feed port is provided with a "cap type" material distributor; There are a number of transverse cooling pipes in the middle cooling box, in which the cooling water circulates. Here is the core heat transfer area of the whole device; The lower discharge hopper is connected with the cooling box, which is mainly used to collect the cooled materials.

How it works:

Material cooling is mainly completed in the cooling box through indirect heat transfer. When the material enters the cooling box from the feed port, the material slides down the wall of the cooling pipe layer by layer under the action of its own gravity. The cooling pipe is arranged horizontally in the box to ensure that the materials fall evenly into the bottom discharge hopper during the falling process. At the same time, the cooling water enters the equipment through the cooling water inlet at the lower part of the box. Through the joint box arranged at both ends of the equipment, the cooling water flows upstream along the cooling pipe and eventually flows out from the cooling water outlet at the upper part of the box, forming a countercurrent cooling mode on the whole.

Features:

1. The cooling medium in the cooler flows in reverse with the material, which strengthens the heat transfer of the material and has high thermal efficiency. It can quickly cool the material of 500℃ to less than 50℃; .

2. The device has the advantages of compact structure, small footprint, low cooling cost, and no air supply system and dust removal system compared with traditional rotary and fluidized bed cooling devices, which is simple and reliable;

3. It can better improve the accumulation of molecular sieve on the upper part, ensure the uniform cooling of materials, avoid the middle material flow rate is fast, the two ends of the flow rate is slow, the accumulation of the central pit "M" type accumulation situation.

4. Continuous feed in and feed out is suitable for assembly line production, cooling material quality is good. During the cooling process, the material is in the overall flow state in the cooling box, and the wear between the particles is small and the particles are intact.

5. The equipment has good corrosion resistance and simple appearance. The whole equipment is made of stainless steel pipes and plates, and argon arc welding is adopted. The welding deformation is small during assembly.

6. The equipment adopts skid mounted structure, which is convenient for cleaning when replacing materials and products, and ensures the purity of products.

Scope of application:

Pharmaceutical, biological engineering, fine chemical, food industry solid material cooling.