What are the technical characteristics of the waste gas incinerator of the waste gas incinerator manufacturer?
Release time:
2023-04-25
The waste gas incinerator of the waste gas incinerator manufacturer is a device that uses the heat generated by the combustion of auxiliary fuel to raise the temperature of combustible and harmful gases to the oxidation and decomposition reaction temperature. There are two types of waste gas incinerators: direct combustion type and regenerative type. By "direct combustion" is meant that only the exhaust gas is burned without heat recovery. However, most of the waste gas incinerators used in the copper cladding industry recover heat to heat the glue machine. In fact, the principle of "direct combustion type" and "regeneration type" is the same, the difference is only whether there are recycled materials in the furnace. The waste gas incinerator is suitable for the treatment of waste gas from spray drying equipment and the purification of harmful gases in petrochemical, pharmaceutical and other industries. The environmental protection function, energy-saving transformation, start-up process and common faults are introduced in detail.

The waste gas incinerator of the waste gas incinerator manufacturer uses the heat generated by the combustion of auxiliary fuel to raise the temperature of combustible and harmful gases to the reaction temperature, thereby oxidizing and decomposing them. The waste gas incinerator is suitable for the treatment of waste gas from spray drying equipment and the purification of harmful gases in petrochemical, pharmaceutical and other industries. The gas purification of water-soluble, viscous and macromolecular substances in organic waste gas shows its advantages. It can not only meet the requirements of environmental protection and labor protection, but also increase the heat exchange equipment to achieve the purpose of waste heat recovery and energy saving.
The inner lining of the incinerator and high-alumina refractory furnace, as well as the design of the oxygen supply vent, can better contact the exhaust gas and light diesel in the diesel tank. Through the pipe burner, the automatic ignition system is ignited and the exhaust system is opened. After combustion, the exhaust gas burns, making it react quickly. The design of the waste gas incinerator is based on the three T (combustion temperature and time vortex) principle. The combustion flame rotates along the main combustion cylinder of the furnace body at a speed of 2-3 m/s, and the rotation speed of 2-3 m/s moves along the axial direction of the furnace body, which greatly prolongs the residence time of the high-temperature exhaust gas flame area. The speed of high-pressure air is 2-3 m/s, forming a closed network of intertwined flames, which can be fully burned. The flame vortex then passes through the spray absorption tower to remove the toxic and harmful components in the flue gas and is discharged into the atmosphere through the chimney.
At present, the waste gas incineration technology of waste gas incinerator manufacturers has matured and achieved good benefits, but the incineration technology is not perfect. After several years of development, it has the following characteristics:
(1) The development of waste gas incineration technology tends to be perfect. With the wide application of new waste gas treatment technology, the structure of incineration equipment is constantly improving. Due to the application of many new technologies in incineration systems, waste gas incineration technology is developing towards new technologies. At the same time, the use of advanced automatic control technology and scientific novel design, improve the waste gas incineration technology.
(2) Incineration technology is developing in the direction of multi-function. Modern incineration systems not only have the function of treating waste gas, but also have multiple functions such as power generation, power supply, heat supply, and gas supply.
(3) Incineration technology is developing in the direction of resource utilization. The waste heat generated by incineration can be used for power generation and superheated steam, which can not only meet the demand of electricity and gas, but also save energy and realize energy reuse. At the same time, energy saving is the goal pursued by incineration plants at home and abroad. For example, improve the combustion efficiency of the incinerator and the heat recovery rate of the waste heat boiler, reduce the heat loss in the flue gas exhaust process, thereby improving energy efficiency.
Key words:
Recommend News