Waste gas incinerator manufacturers: the use of waste gas incinerator points
Release time:
2022-11-15
Waste gas incinerator is suitable for organic waste gas treatment with complex composition, low concentration and large air volume of corrosive or halogen, sulfur, phosphorus, arsenic and other toxic substances to the catalyst. Of course, this equipment is also very suitable for treating some special odor that requires high temperature oxidation to eliminate odor.Waste gas incinerator manufacturersLet's talk about the main points of its use.

Waste gas incinerator manufacturers said that the product is mainly produced using regenerative heat exchange device, heat storage carrier and gas direct heat exchange, furnace radiation temperature and pressure, heating speed;% or more; This can be a large degree of recovery of sensible heat in the combustion product. High thermal efficiency, low exhaust temperature, energy saving. Reducing fuel consumption also means reducing greenhouse gas emissions.Waste gas incinerator manufacturersIt is said that the temperature of the regenerator is uniform, the classification is increased, the heat transfer in the furnace is strengthened, and the heat transfer effect is better. Therefore, the furnace volume of the equipment of the same processing capacity can be reduced, greatly reducing the footprint of the equipment. Because the combustion process is different from the traditional thermal incinerator, the waste gas incinerator manufacturers believe that the gradual combustion in the furnace high temperature regenerator, there is no high temperature front, so the noise is low. Especially in use, the high-temperature flame combustion area is expanded, and the flame boundary almost extends to the furnace boundary, which makes the temperature in the furnace uniform, improves the purification efficiency on the one hand, and prolongs the service life of the furnace refractory material on the other hand.
In addition, the waste gas incinerator manufacturers believe that it has different thermodynamic conditions from the traditional combustion process, and also uses graded combustion technology to delay the release of combustion energy; the temperature rise in the furnace is uniform, the burning loss is low, and the heating effect is good. The local high temperature and high oxygen zone in the traditional combustion process no longer exists, and the production of thermal nitrogen oxides (NOX) is obtained, and the environmental protection effect is good. In particular, the overall temperature in the combustion chamber rises and the distribution is more uniform; the furnace temperature can be as high as 760-1100 ℃, the organic matter combustion destruction rate is high, the flue gas stays at high temperature in the furnace for a long time, the organic matter is oxidized and decomposed, and the environmental protection effect is better and remarkable. Since biomass fuel is made from sawdust or corn straw, the waste gas incinerator is not environmentally friendly, but it is much more environmentally friendly than the waste gas incinerator. have in different placesWaste gas incinerator manufacturersHowever, some locations currently allow applications, and some locations have not been clearly identified. Exhaust gas incinerator manufacturers have been committed to the development and manufacture of heat exchangers, the company has a number of independent research and development of national invention patent technology.
The content of the above article is the main points of the use of waste gas incinerator for all friends, and a better waste gas incinerator manufacturer is also shared in the content. If you have this demand, you can check it out, hoping to bring you help.
Key words:
Recommend News