What are the requirements for water quality of steam heat exchanger? What are the needs for use?
Release time:
2022-11-04
Steam heat exchangerWhat are the requirements for water quality? What are the needs for use?

The durability of steam heat exchangers involves many factors, and the main factors that determine the service life of steam heat exchangers are: water quality standards, operating standards, correct selection and qualified products.Steam heat exchangerIt has the characteristics of good heat dissipation and energy saving. In the same room, if the steam heat exchanger of the same specification is used, the number of aluminum castings is less than that of steel. The steam heat exchanger has good oxidation resistance and corrosion resistance without adding any additives. The principle is that once aluminum encounters oxygen in the air, it will produce a layer of oxide film. This oxide film is tough and dense, which can prevent further corrosion of the host material. This radiator is integrally die-cast, so there is no weld leakage. In addition, its advantage is that the product is not restricted by the district heating system. Even in an open boiler system, it will not be corroded by oxygen. Due to the modular combination design, after a heating season, if you find that the indoor temperature is insufficient, you can install one or two to meet your needs without replacing the entire heating unit.
When installing steam heat exchangers, the blades should be in the direction of cooling air flow; the air temperature at the inlet should not exceed 400 degrees Celsius. The wind speed at the inlet is 4-6 ml;Because the steam heat exchanger has the characteristics of wind resistance parameters, when selecting the overall steam heat exchanger, the thermal resistance of the heat exchanger should be checked according to the load requirements and the fan capacity. The thermal resistance and wind resistance of steam heat exchanger are the relationship between flow resistance and wind speed.Before the start of the steam heat exchanger, the cooling water and mixed gas in the equipment shall be effectively cleaned and preheated for 5-10 minutes before starting work. When the heat exchanger is in operation, steam is primarily used as a steam heat exchanger. When the fan stops or encounters other accidents, immediately stop its heat medium supply. When the equipment stops working, the cold air supply should be stopped.
Steam heat exchanger cover plates shall be provided with vent valves. Depending on the heat medium, the installation position is also different. When using hot water, put it on the upper cover plate. Exhaust the air in the radiator cavity to improve heat dissipation efficiency.Steam heat exchangerCorrosive media cannot be used in operation. After the equipment works, it needs to be cleaned with cold water. To prevent freezing, the hot water radiator should use a small amount of hot water to continue to flow into the radiator cavity. The steam heat exchanger needs to make different choices according to different situations in the use process, and the equipment can be effectively selected according to different water quality. When in use, it is also necessary to ensure the service life of the steam heat exchanger. Pay more attention when using it at ordinary times. The more you value it, the longer your service life will be.It is strictly prohibited to overtemperature and overpressure, so as not to affect the service life and damage the equipment.
Key words:
Recommend News