Principle and advantages of steam heat exchanger


Release time:

2022-10-09

  The principle and advantages of steam heat exchanger steam through the heat exchanger is a kind of steam as a heat source to control the heating of water equipment.Steam heat exchangerIt is a new type of heat exchanger. The composite process is adopted, which has the effect of heat exchange. High temperature hot water, steam or heat transfer oil is preferable as the heating medium of the heating device. In the modern enterprise industry, this heat exchanger is widely studied and used in China's chemical industry, textile printing and dyeing, chemical fiber and other industries.

蒸汽换热器的原理及优点

The plate heat exchanger steam heat exchanger successfully uses steam to produce high-speed mixing with negative vacuum water absorption. The mixed steam not only requires a certain pressure, but also requires a certain kinetic energy.Steam heat exchangerThe basic working principle of the steam can enter the core body and spray at high speed along the inclined hole of the side wall. Its kinetic energy is water absorption, which promotes the development of water flow in our country along the tangent analysis direction of the core edge, contacts with the inner wall of the shell at a larger angle, and rotates by the shell block. Due to the reasonable design of the shell solvent, the flow rate is suitable and stable. The rotating flow can not only better absorb steam energy and eliminate noise, but also disperse steam into a large number of miniature soda units. This small volume combination produces very low noise when mixing.

The experimental results show that the noise of the whole steam heat exchanger is about 50DB. The rotating hot water tends to the inner wall of a shell structure under the action of centrifugal force of its own enterprise, and is thrown out of the outer holes of the upper and lower plates of the shell after being squeezed. The hot water thrown out also has a certain angular velocity, which can promote the rotation of the water nearby or even in the entire water tank, so that the water temperature tends to be uniform. Hot water is thrown from the outer holes of the upper and lower plates of the shell, and the external environmental pressure of the enterprise can be formed in the shell, and the cold water outside the heater is sucked into the shell through the upper and lower plates along the shell. This is how the water in the water tank is heated to achieve the ideal heating effect.

The main advantages of the steam heat exchanger: the development of energy saving, the steam heat exchanger can quickly and evenly dissolve the steam in the water, and even if the pressure difference between the steam and the heated liquid is 0.04MPA, it can better add the steam to the heated liquid, so the heat loss is small and the thermal efficiency is high.

High hot water temperature: high temperature hot water can be obtained by vortex heater. The heating temperature of the open container is 98 ℃, and the heating temperature of the pressure vessel can reach 150 ℃. The high management working environment pressure of steam passing through the heat exchanger is 1.6MPA. The vibration is small and the noise is low, which is beneficial to improve the surrounding environment. Compared with the old tube heater, due to the use of the internal swirl muffler structure, the noise of the vortex muffler is less than 50DB, and the vibration is greatly reduced.

The total investment is low: the heat source steam can directly enter the water tank economically, which can save the hot water system with the pump room equipment and save the enterprise investment. Simple operation and maintenance: water and steam are controlled separately, so that the remaining cold water in the box can be heated repeatedly; it is convenient for temperature control.Steam heat exchangerCan be made of stainless steel production, without disassembly and maintenance, long service life.

Key words: