What are the advantages of finned tube heat exchangers?
Release time:
2022-08-16
finned tube heat exchangerWhat are the advantages?
Finned tube heat exchangers are mainly used for heat exchange between liquid and gas. The purpose of heat transfer enhancement can be achieved by adding wings. The basic tube of the ordinary finned tube can be a carbon steel tube, a stainless steel tube, a copper tube, etc. The fins can also be carbon steel strips, stainless steel strips or other materials, so what are the advantages of finned tube heat exchangers?

finned tube heat exchangerWhat are the advantages?
1. In the production process of the chemical industry, the gas usually needs to be heated or cooled. The heat transfer coefficient of gas is very small. When the refrigerant is cooling water or steam, heat exchange is performed with the gas. The gas side of air has become the main factor in controlling the heat transfer coefficient. Increasing the heat dissipation area on the air side can improve the heat transfer effect. Therefore, adding fins on the gas side of the heat exchange tube not only reduces the thermal resistance on the air side and increases the heat dissipation area on the air side, but also enhances the turbulence when the gas flows and increases the heat transfer coefficient of the gas.
2. If the heat transfer coefficient of the refrigerant heat medium is more than three times, it is economical to use the airfoil heat exchanger. At present, in addition to installing fins outside the tube, heat exchangers with fins inside the tube have also been developed. Most of the piping is carbon steel, but most of the wing is aluminum. The wing can be fixed on the pipe by winding, inlay, welding, etc. Airfoils can be divided into low and high airfoils by height. The low fins are mostly threaded tubes, which are suitable for two occasions with small fluid heat transfer coefficient. The invention is suitable for applications where the heat transfer coefficient of the fluid is large. The main application of airfoil heat exchangers is air coolers, also known as air cooling devices.
3. In the production of the chemical industry, the coolant is mainly used as a coolant. With the rapid development of China's industry, industrial water consumption has increased significantly. Therefore, the problem of waste of water resources, especially for areas with poor water quality, also brings problems such as sewage treatment and waste water recycling. Therefore, in the oil refining and petrochemical industries, more and more air coolers are used as condensers or coolers. However, the air cooler uses the air temperature in the atmosphere as a coolant to cool, and its application has its limitations, so it cannot replace water cooling in any occasion. The cold device is designed to have a hot outlet temperature of 15-20 and a temperature below 35.
4. A wide range of heating media can be used in steam systems and hot water systems; it has heat transfer performance and does not exchange heating and cooling media. The heat transfer efficiency of the heat exchanger can replace the heat transfer of the finned tube.
5. The use of wing tube heat exchanger: to ensure the cleanliness of the wing tube heat exchanger network, to clean the water storage device of the wing tube heat exchanger in time to prevent the heat exchanger from clogging; to gradually increase the temperature; to pay attention to the quality of the medium, can not contain acid or alkaline or alkaline substances, which can prevent the wing tube of the heat exchanger.
Key words:
Recommend News