Basic overview of finned tube heat exchangers


Release time:

2022-07-18

finned tube heat exchangerThe application is also very extensive, may be most people for this product is not very understanding, but it does not matter, in order to let more people know it, the next small series to introduce the basic overview of finned tube heat exchanger.

翅片管换热器的基本概述

The finned tube heat exchanger has many advantages, and its service life is long. So it was approved by everyone. Nowfinned tube heat exchangerWhen working, if its tube diameter becomes smaller, and then install different forms of fins, optimize the design of the heat exchanger, upgrade its manufacturing process, and optimize the heat exchange effect of the fin-tube heat exchanger from the actual use, it will gradually Evolve into a fin-tube heat exchanger and become a widely used heat exchange equipment. For users, what you need to know is that if the heat transfer coefficient of the refrigerant heat medium differs by more than three times, it is economical and reasonable to use a finned tube heat exchanger. At present, in addition to installing finned tube heat exchangers outside the tubes, heat exchange tubes with fins inside the tubes have also been developed. The pipes are mostly carbon steel, but the fins are mostly aluminum. The fins can now be fixed to the pipe by winding, inlaying, welding, etc. The type of fins can be divided into low fins and high fins according to height. Of course, if low fins are used, they are mostly threaded tubes, which is suitable for occasions where the heat transfer coefficients of the two fluids are not much different. High fins are suitable for applications where the heat transfer coefficients of the two fluids are very different. The main application of finned heat exchangers is air coolers, also known as air coolers.

When using finned tube heat exchangers, we also need to know that water is mainly used as a coolant in chemical production. With the rapid development of my country's industry, industrial water consumption has increased significantly, so we are facing the problem of water waste, especially in areas with poor water quality, which will naturally bring about problems such as sewage treatment and wastewater recycling. Therefore, you can also see that in the oil refining and petrochemical industries, air coolers are increasingly used as condensers or coolers. However, we found that its air cooler uses normal temperature air in the atmosphere as the coolant, and its application also has its limitations, so it cannot replace water cooling under any circumstances. In general, the design temperature difference of the hot fluid outlet of the air cooler is 15-20 ℃, and the temperature is lower than 35 ℃. Finned tube heat exchanger It also needs to be well maintained. Because the storage device of the finned tube heat exchanger should be cleaned in time to ensure the cleanliness of the finned tube heat exchanger pipe network and prevent the heat exchanger from clogging; pay attention to the quality of the medium, and do not contain alkaline or acidic substances to prevent the heat exchanger The fin tube is corroded; when in use, it should be fully preheated and gradually heated.

These knowledge points are the basic overview of finned tube heat exchanger. If you want to purchase, you can customize it directly in our company.finned tube heat exchangerThe quality will also be guaranteed. If there is any problem, you can find after-sales service.

Key words: